Reservoirs

The Ten Ounce Reservoir is standard on Accu-Lube applicators with 1 to 3 nozzles. This rugged reservoir is made from injection molded polycarbonate and the enclosure cap is injection molded polypropylene. The polycarbonate reservoir is transparent, allowing for visual inspection of contents. It will tolerate temperature changes from minus 40º F. to maximum of 150º F. without any significant dimensional changes. The reservoir dispenses liquid, by gravity into the applicator and has a vented cap. When installing do not tighten by hand please use a wrench on the pipe mounted thread.

Specifications:
Capacity 10 Ounces
Thread Size 1/4" NPT
Diameter 2 7/8"
Height 5 9/16"
Pressure.........Atmospheric Pressure
Temperature......150º F. Maximum
Reservoir........Polycarbonate
Seals............Viton®
Mtg. Shank ......Steel, Plated
Cover............Polypropylene
Viton® is a registered trademark of DuPont Dow Corp.

These reservoirs include a metal filter (100 mesh) dispense lubricant by gravity to the Accu-Lube pumps through a 1/4" NPT pipe fitting on the bottom. The durable, crystal clear acrylic reservoirs are useful for many applications where it is desirable to visually inspect the presence and clarity of the lubricant. Fill from above through the self-closing filler cap on top. Available in three sizes.

Specifications:
Pressure...............Atmospheric
Temperature............160º F. Max.
Reservoir..............Acrylic
Seals..................Buna-N
Filter.................100 Mesh
Covers.................Aluminum Alloy
Low Level Sensor.......Polypropylene

The same as the acrylic reservoirs above but these reservoirs have a polypropylene float inside that can be wired to closes a circuit when the lubricant level almost reaches the bottom. This is useful to connecting low level warning light or sending signals to PC or CNC controllers. Available in quart or gallon sizes.

Max Recommended Current:
24 VDC 1.0 AMP
50 VDC 0.8 AMP
100 VDC 0.4 AMP
24 VAC 1.0 AMP
115 VAC 0.25 AMP

Install the reservoir to a location with more access. Keep above the applicator to maintain a gravity flow.